Albums: WA7DUH And WB7CNV Tower Construction
WA7DUH And WB7CNV Tower Construction
Photo essay of tower project at the station of Linda WB7CNV and Steve WA7DUH. They live just outside of the Richland and West Richland city limits in Benton County. Project is to initially erect a 65 ft guyed tower, but to design it for 75 ft or higher. Benton County has an ordinance controlling "communications facilities" (BCC 11.65) which includes "communication towers and antennas." Many of the requirements are exempted for amateur radio towers and antennas not exceeding 65 ft.P1020730.JPG
Distance between this driven element EHU and the element return fixture is critical. Houston, we have a problem. The driven element is centered on the mast, which means it will loop around the tower. This will cause great difficulty with the tower guy lines.
P1020742.JPG
All the cabling prior to clean up.
P1020714.JPG
Peter Rosenberg (AC7SB) from Fall City WA joins the antenna assembly team. Steve (WA7DUH), Peter and Gary (W7TYQ) apply anti-sieze compound to the staddles that will be used for one of the Return Element fixtures. Liberal use of anti-sieze compound is critical because of the many dissimilar metals used in both the antenna and hazer (aluminum, stainless steel hardware and galvanized steel.)
P1020681.JPG
Gary's (W7TYQ) dog Fritz watches the action from the deck.
P1020729.JPG
Both the EHU and Element Return fixture must be leveled, then torqued to specifications.
P1020712.JPG
Steve is a slave driver. Time for lunch!
P1020710.JPG
Boom now mounted on the mast, which is mounted on the hazer (antenna elevator) using the thrust bearing (on top) and the Hygain rotator. The antenna will be pushed closer to the top of the mast assembly is complete.
P1020692.JPG
W7TYQ (Gary) tightens everything down after applying antiseize paste.
P1020751.JPG
Dave W7DJE helps measure out an element tube. These nesting tubes are pulled out, and the ends are trimmed to length with a hacksaw.
P1020583.JPG
#4 solid copper over to the house electrical entrance ground. Found more irrigation, Spinkler valve control cable (run in water pipe PVC) and some Romex (indoor only) that the previous owner had run to some outdoor lights. Gotta fix all that.
P1020724.JPG
Steve WA7DUH; Peter's wife Tacy (on the end); Gary W7TYQ and Dave W7DJE trying to program a 2M handi-talkie; and Peter AC7SB.
P1020686.JPG
Hygain T2XD rotator mounted on the hazer.
P1020705.JPG
Let's break off some bolts with an air driven impact wrench. Luckily the manufacturer provided spares.